Huawei S1700 Series Web User Manual page 128

S1700 Managed Series Ethernet Switches
Web User Manual
Table 8-4 Parameters of IPv6 Routing
Item
IPv6 Prefix
Protocol Type
Next Hop
Interface Name
Backup State
Status
Create an IPv6 Routing
Step 1 Click IP Routing>IPv6 Route > IPv6 Static/Default Route Configure in tab bar.
Step 2 Click New button, opening the configuration page shown as the figure below.
Figure 8-6 New IPv6 Routing
Step 3 Configure the needed parameter.
Step 4 Click Apply button to apply all the changes made.
Issue 05 (2012-10-25)
Description
Prefix of destination IPv6.
Routing type.
IPv6 address of the next hop gateway
VLAN number of static routing entry
Primary of secondary routing.
The routing is effective or not, which means it can be used to
conduct routing forwarding or not.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 IP Routing
118