U051 When [Set Paper Loop Amount Bw] Is Selected - Kyocera TASKalfa 250ci Service Manual

2JZ/2JX/2JV/2H7
Maintenance
item No.
U051 When [Set Paper Loop Amount BW] is selected
Display
MPT (Large) B/W
Cassette (L) B/W
MPT (Small) B/W
Cassette (S) B/W
Large size: 218 mm or more in width of paper.
2. Press the system menu key.
3. Place an original and press the start key to make a test copy.
4. Press the system menu key.
5. Change the setting value using the +/- or numeric keys.
For output example 1, increase the value. For output example 2, decrease the value.
The greater the value, the larger the deflection; the smaller the value, the smaller the deflection.
6. Press the start key. The value is set.
Remark
When changing the setting value of [Large] each item is modified, equal to amount of the value which is
changed adds also the value of [Small] each item and is pulled.
Completion
Press the stop key. The indication for selecting a maintenance item No. appears.
1-3-30
Description
Description
Paper feed from MP tray
(when large size paper is used)
Paper feed from cassette
(when large size paper is used)
Paper feed from MP tray
(when small size paper is used)
Paper feed from cassette
(when small size paper is used)
Original
example 1
Figure 1-3-6
Setting
range
-30 to 20
-30 to 20
-30 to 20
-30 to 20
Copy Copy
example 2
Initial Change in
setting value per step
0 1 mm
0 1 mm
0 1 mm
0 1 mm