Date/Timer; Color Calibration; Developer Refresh; Laser Scanner Cleaning - Kyocera TASKalfa 250ci Service Manual

2JZ/2JX/2JV/2H7-1
6. The second color pattern is printed.
Check that the number "2" (to "4") and two (to four)
magenta boxes are printed in the top right corner of
the color pattern and repeat steps 4 to 6 three times
to read color patterns 2, 3 and 4 in sequence.
7. Press [OK] in the adjustment end confirmation
screen.

Color Calibration

1. Press cursor down key and then [Next] of Color
Calibration.
2. Press [Execute]. Color calibration begins.
3. Press [OK] after color calibration is complete.

Developer Refresh

1. Press cursor down key and then [Next] of Devel-
oper Refresh.
2. Press [Execute]. Developer refresh begins.
3. Press [OK] after developer refresh is complete.

Laser Scanner Cleaning

1. Press cursor down key and then [Next] of Laser
Scanner Cleaning.
2. Press [Execute]. Laser scanner cleaning begins.
3. Press [OK] after laser scanner cleaning is com-
plete.
System Initialization
1. Press [Execute] of System Initialization.
2. If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
3. When the confirmation screen appears, press[Yes].
Initialization starts.
4. Once the initialization ends, the message Task is
completed. Turn the main power switch off and on.
appears. Turn the main power switch off.

(9) Date/Timer

Date/Time
1. Press [Change] of Date/Time.
2. Press [+] or [-] to enter the date and time respec-
tively.
3. Press [Off] or [On] of Summer Time and press [OK].
Date Format
1. Press [Change] of Date Format.
2. Select [MM/DD/YYYY], [DD/MM/YYYY], or [YYYY/
MM/DD] and press [OK].
1-3-150
Time Zone
1. Press [Change] of Time Zone.
2. Select the location.
3. Press [Off] or [On] of Summer Time and press [OK].
Auto Panel Reset
1. Press [Change] of Auto Panel Reset.
2. Press [Off] or [On].
3. Press [OK].
Panel Reset Timer
1. Press [Change] of Panel Reset Timer.
2. Press [+] or [-] to enter the time until Auto Panel
Reset is turned on.
You cannot use the number keypad to enter this
value.
3. Press [OK].
Low Power Timer
1. Press [Low Power Timer].
2. Press [+],[-] or the numeric keys to enter the time
until Low Power Mode is turned on.
3. Press [OK].
Auto Sleep
1. Press [Change] of Auto Sleep.
2. Press [Off] or [On].
3. Press [OK].
Sleep Timer
1. Press [Change] of Sleep Timer.
2. Press [+], [-] or the numeric keys to enter the time
until Auto Sleep is turned on.
3. Press [OK].
Auto Error Clear ON/OFF
1. Press [Change] of Auto Error Clear.
2. Press [Off] or [On].
3. Press [OK].
Error Clear Timer
1. Press cursor down key and then [Change] of Error
Clear Timer.
2. Press [+] or [-] to enter the time until printing
restarts.
You cannot use the number keypad to enter this
value.
3. Press [OK].
Interrupt Clear Timer
1. Press cursor down key and then [Change] of Inter-
rupt Clear Timer.
2. Press [+] or [-] to enter the time for the interrupt
clear timer.
3. Press [OK].