Eject Section; Feed-Shift Section; Duplex Section; Optional Dp - Kyocera TASKalfa 250ci Service Manual

2JZ/2JX/2JV/2H7
Section Jam code
Eject 50
section Misfeed in eject
section
51
Misfeed in job sep-
arator eject section
Feed- 52
shift sec- Misfeed in feedshift
tion section
Duplex 60
section Misfeed in duplex
paper conveying
section 1
61
Misfeed in duplex
paper conveying
section 2
Optional 70
DP No original feed
1-4-6
Conditions
The eject switch (ESW) does not turn off within
specified time of the loop sensor (LS) (40/40, 50/40
ppm)/JAM detection sensor (JDS) (25/25, 30/30
ppm) turning off.
The job eject switch (JESW) does not turn off within
specified time of the eject switch (ESW) turning off.
During switchback ejection, the job eject switch
(JESW) does not turn off within specified time.
During switchback ejection, the job eject switch
(JESW) does not turn off within specified time of the
eject switch (ESW) turning off.
During switchback ejection, the job eject switch
(JESW) does not turn on within specified time.
During switchback ejection/job separator ejection,
the job eject switch (JESW) does not turn on within
specified time of the eject switch (ESW) turning on.
During finisher ejection, the finisher eject switch
(FESW) does not turn on within specified time of the
eject switch (ESW) turning on.
During finisher ejection, the finisher eject switch
(FESW) does not turn off within specified time of the
eject switch (ESW) turning off.
During paper switchback operation in the main body,
the feedshift switch (FSSW) does not turn on within
specified time.
The duplex switch (DUSW) does not turn on within
specified time of the feedshift switch (FSSW) turning
on.
During duplex refeeding, the duplex switch (DUSW)
does not turn off within specified time of the registra-
tion switch (RSW) turning on.
During duplex refeeding, the registration switch
(RSW) does not turn on within specified time.
The original feed switch (OFSW) does not turn on
within specified time during the first sheet feeding
(Retry 5 times).
The original feed switch (OFSW) does not turn on
within specified time during the second sheet feed-
ing (Retry 5 times).
During original tray ascent, the tray upper limit
switch (TULSW) does not turn on within specified
time.
Specified time
40/40 ppm
25/25 ppm 50/40 ppm
50/40 ppm
30/30 ppm
Color
2767 ms 1976 ms 1660 ms
1047 ms 748 ms 628 ms
Paper Paper Paper
length + length + length +
1133 ms 810 ms 680 ms
2720 ms 1943 ms 1632 ms
1800 ms 1286 ms 1080 ms
1667 ms 1190 ms 1000 ms
1913 ms 1367 ms 1148 ms
2840 ms 2029 ms 1704 ms
1913 ms 1367 ms 1148 ms
4313 ms 3081 ms 2588 ms
1220 ms 871 ms 732 ms
1080 ms 771 ms 648 ms
1159 ms 705 ms 705 ms
1159 ms 705 ms 705 ms
2 s 2 s 2 s
B/W