System Section; Paper Feed Section (Problems Solving) - Kyocera TASKalfa 250ci Service Manual

Section Jam code
System 00
Initial JAM
04
Cover open JAM
05
Secondary paper
feed does not start
09
Sequence error
JAM
Paper 10
feed sec- No paper feed from
tion cassette 1
11
No paper feed from
cassette 2
12
No paper feed from
optional cassette 3
13
No paper feed from
optional cassette 4
14
No paper feed from
MP tray
15
Misfeed in paper
feeder horizontal
paper conveying
section 1
16
Misfeed in paper
feeder horizontal
paper conveying
section 2
Conditions
The power is turned on when a sensor in the con-
veying system is on.
Cover is open during paper conveying.
Secondary paper feed does not start within specified
time of arrival of paper at the registration section.
Sequence error is occurred between the machine
and 3000-sheet paper feeder.
Feed switch 1 (FSW1) does not turn on within the
specified time of paper feed clutch 1 (PFCL1) turn-
ing on and cannot be detected at the same timing
even after retry.
Feed switch 2 (FSW2) does not turn on within the
specified time of paper feed clutch 2 (PFCL2) turn-
ing on and cannot be detected at the same timing
even after retry.
Feed switch 3 (FSW3) does not turn on within the
specified time of PF paper feed clutch 1 (PFPFCL1)
turning on and cannot be detected at the same tim-
ing even after retry (paper feed from paper feeder).
Feed switch 3 (FSW3) does not turn on within the
specified time of PF paper feed clutch 1 (PFPFCL1)
turning on (paper feed from 3000-sheet paper
feeder).
The PF feed switch (PFFSW) does not turn on
within the specified time of PF paper feed clutch 2
(PFPFCL2) turning on and cannot be detected at the
same timing even after retry (paper feed from paper
feeder).
The MP paper feed switch (MPPFSW) does not turn
on within the specified time of the MP paper feed
clutch (MPPFCL) turning on and cannot be detected
at the same timing even after retry.
Paper path sensor 3 (PPS3) does not turn on within
specified time of PF paper feed clutch 2 (PFCL2)
turning on (paper feed from 3000-sheet paper
feeder).
Paper path sensor 2 (PPS2) does not turn on within
specified time of the paper path sensor 3 (PPS3)
turning on (paper feed from 3000-sheet paper
feeder).
2JZ/2JX/2JV/2H7
Specified time
40/40 ppm
25/25 ppm 50/40 ppm
50/40 ppm
30/30 ppm
Color
- - -
- - -
40 s 40 s 40 s
- - -
1713 ms 1224 ms 1028 ms
1800 ms 1286 ms 1080 ms
2853 ms 2324 ms 2112 ms
670 ms 670 ms 670 ms
2853 ms 2324 ms 2112 ms
1540 ms 1100 ms 924 ms
360 ms 360 ms 360 ms
380 ms 380 ms 380 ms
B/W
1-4-3