Kyocera TASKalfa 250ci Service Manual page 211

Section Jam code
Optional 91
finisher Finisher cover
open
92
Eject paper sensor
non-arrival jam
(document finisher
only)
93
Reverse sensor
jam (document fin-
isher only)
94
Paper entry sen-
sor stay/remaining
jam (document fin-
isher only)
95
Paper conveying
sensor jam (docu-
ment finisher only)
Conditions
(3000-sheet document finisher)
The front cover, top cover or right sub tray is opened
when starting the finisher operation.
The centerfold unit top cover is opened when start-
ing the center-fold operation.
The mailbox cover is opened when starting the oper-
ation.
(Document finisher)
The finisher cover becomes open during paper is
running.
Paper is remaininig in paths at power on.
In the straight mode, the eject paper sensor (EPS) is
not turned on even if a specified time has elapsed
after the paper entry sensor (PES) was turned on.
The reverse sensor (SBS) does not turn on within
specified time of paper entry sensor (PES) turning
on (unfinished reversing canceled).
The reverse sensor (SBS) is not turned on within
specified time (unfinished reversing set).
The reverse sensor (SBS) is not turned off within
specified time its turning on (resident reversing can-
celed).
The reverse sensor (SBS) is not turned off within
specified time its turning on (resident reversing set).
The paper entry sensor (PES) is not turned off within
specified time its turning on.
The paper conveying sensor (PCS) is not turned off
within specified time its turning on (reversing can-
celed).
The paper conveying sensor (PCS) is not turned off
within specified time its turning on (reversing set).
2JZ/2JX/2JV/2H7
Specified time
40/40 ppm
25/25 ppm 50/40 ppm
50/40 ppm
30/30 ppm
Color
- - -
- - -
- - -
402 ms 479 ms 671 ms
431 ms 431 ms 431 ms
1680 ms 2000 ms 2800 ms
700 ms 700 ms 700 ms
1260 ms 1500 ms 2100 ms
1260 ms 1500 ms 2100 ms
656 ms 656 ms 656 ms
B/W
1-4-11