U611 Setting System; Setting The Number Of Adjustment Lines For Automatic Reduction; Setting The Number Of Adjustment Lines For Automatic Reduction When A4 Paper Is Set; Setting The Number Of Adjustment Lines For Automatic Reduction When Letter Size Paper Is Set - Kyocera KM-1820 Service Manual

3JG
Maintenance
item No.
U610 Increase the setting if a page received in the reduction mode is over-reduced and too much trailing edge
(cont.) margin is left. Decrease it if the received image does not include all transmitted data.
2. Press the enter key. The value is set.
Completion
Press the back key. The screen for selecting a maintenance item No. is displayed.
U611 Setting system 2
Description
Sets the number of adjustment lines for automatic reduction.
Start
1. Press the enter key.
2. Select the item to be set using the up/down cursor keys.
Display
1: ADJ LINES
2: ADJ LINES (A4)
3: ADJ LINES (LT)

Setting the number of adjustment lines for automatic reduction

Sets the number of adjustment lines for automatic reduction.
1. Change the setting using the left/right cursor keys.
Description
Number of adjustment lines for automatic reduction
2. Press the enter key. The value is set.

Setting the number of adjustment lines for automatic reduction when A4 paper is set

Sets the number of adjustment lines for automatic reduction when A4 paper is set.
1. Change the setting using the left/right cursor keys.
Description
Number of adjustment lines for automatic reduction
when A4 paper is set
2. Press the enter key. The value is set.

Setting the number of adjustment lines for automatic reduction when letter size paper is set

Sets the number of adjustment lines for automatic reduction when letter size paper is set.
1. Change the setting using the left/right cursor keys.
Description
Number of adjustment lines for automatic reduction
when letter size paper is set
2. Press the enter key. The value is set.
Completion
Press the back key. The screen for selecting a maintenance item No. is displayed.
1-3-8
Description
Description
Sets the number of adjustment lines for automatic reduction.
Sets the number of adjustment lines for automatic reduction
when A4 paper is set.
Sets the number of adjustment lines for automatic reduction
when letter size paper is set.
Setting range Initial setting
0 to 22 7
Setting range Initial setting
0 to 22 22
Setting range Initial setting
0 to 26 26