Eject/Feedshift Section - Kyocera TASKalfa 250ci Service Manual

2JZ/2JX/2JV/2H7
2-1-7

Eject/feedshift section

(1) Eject/feedshift section
The eject/feedshift sections switch the paper path based on the copy mode and eject paper or convey the paper to the
duplex section or job separator. For duplex copy mode, the paper for which copying on the rear side has been completed
is conveyed to the duplex section by the feedshift section operation.
When paper is ejected to the finisher or the job separator tray, the paper path is switched by rotation of the rotary guide to
convey the paper into the job separator.
18
16
15
14
5
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
2-1-20
17 4
2
Figure 2-1-22 Eject/feedshift section
Rotary guide
Eject pulley
Rotary guide sensor (RGS)
Eject switch (ESW)
Actuator (eject switch)
Eject pulley
Eject roller
Eject pulley B
Eject charge erasing brush
1 12 6
2 3
(10) Actuator (paper full sensor)
(11) Lower eject frame
(12) Upper eject frame
(13) Output tray
(14) Feedshift roller
(15) Middle pulley
(16) Feedshift switch (FSSW)
(17) Actuator (feedshift switch)
(18) Left eject frame
8 9
7
11
10
13