Remarks On Main Pwb Replacement - Kyocera TASKalfa 250ci Service Manual

2JZ/2JX/2JV/2H7
1-6-2

Remarks on main PWB replacement

When replacing the main PWB, remove the EEPROM from the main PWB that has been removed and then reattach it to
the new main PWB.
When refitting DIMM, check "CODE", "FLS" and "SPI" marked on the PWB and refit them to the original positions.
YS1
YS2
YS5
1-6-2
EEPROM
DIMM
CODE
FLS
SPI
Figure 1-6-3
DDR
Main PWB
Figure 1-6-2
Main PWB