U429 Setting The Offset For The Color Balance - Kyocera TASKalfa 250ci Service Manual

Hide thumbs Also See for TASKalfa 250ci:

Table of Contents

2JZ/2JX/2JV/2H7

Setting the offset for the color balance

Displays and changes the density for each color during copying in the various image quality modes.

To change the balance for each color.

1. Press the start key.

2. Select the image quality mode. The setting screen for the selected item is displayed.

Text + Photo

1. Select the item to be set.

2. Change the setting value using the +/- or numeric keys.

Increasing the value darkens the density and decreasing it lightens the density.

3. Press the start key. The value is set.

While this maintenance item is being executed, copying from an original is available in interrupt copying mode

(which is activated by pressing the system menu key).

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Density of each color in the text & photo mode

Density of each color in the photo mode

Density of each color in the printed photo mode

Density of each color in the text mode

Density of each color in the map modes

Value of the cyan setting

Value of the magenta setting

Value of the yellow setting

Value of the black setting

Setting range

Initial setting

Show Quick Links

Table of Contents

Taskalfa 300ci Taskalfa 500ci Taskalfa 400ci