Maintenance
item No.
Setting for toner applying operation
U147
Description
Sets the mode for removing charged toner in the developing unit (T7 control: Toner applying operation).
Purpose
Changing settings are not required. However, when the documents with lower print density (e.g. less than 2%)
should customarily printed in a great volume, mode must be changed.
If the charged toner stays inside the developing unit, density decreases.
Method
1. Press the start key.
2. Select the item to be set. The setting screen for the selected item is displayed.
Display
Transition Time
Set Operation Mode
Upper Limit
Sleeve Cleaning
Set Drum Cleaning Mode
Set Minimum Value
Setting: [Transition Time]
1. Change the setting value using the +/- or numeric keys.
Display
Transition Time
2. Press the start key. The value is set.
Setting: [Set Operation Mode]
1. Select the item to be set.
Display
OFF
MODE1
MODE2
MODE3
Initial setting; MODE1
2. Press the start key. The setting is set.
Description
Description
Duration of toner applying
Settings for toner applying operation
Upper limit printing ratio of toner applying quantity with each mode
Toner collection operational interval on developing sleeve after the
toner applying operation (T7 control)
Settings for developing the toner layer in accordance with coverage
ratio
Toner layer width when [Set Drum Cleaning Mode] is selected
Description
Duration of toner applying
Description
Do not applying the toner operation
Normal mode
Toner consumption mode
Normal mode (setting value is changed possibility)
2JZ/2JX/2JV/2H7-1
Setting range
Initial setting
0 to 255 (s)
70
1-3-73