Show Ipv6 Traffic; Table 200: Show Ipv6 Mtu - Display Description - Edge-Core ECS4510-28P User Manual

Table 200: show ipv6 mtu - display description

Field
MTU
Since
Destination
Address
* No information is displayed if an IPv6 address has not been assigned to the switch.
This command displays statistics about IPv6 traffic passing through this

show ipv6 traffic

switch.
C
OMMAND
Normal Exec, Privileged Exec
E
XAMPLE
The following example shows statistics for all IPv6 unicast and multicast
traffic, as well as ICMP, UDP and TCP statistics:
Console#show ipv6 traffic
IPv6 Statistics:
IPv6 received
IPv6 sent
ICMPv6 Statistics:
ICMPv6 received
Description
Adjusted MTU contained in the ICMP packet-too-big message returned from
this destination, and now used for all traffic sent along this path.
Time since an ICMP packet-too-big message was received from this
destination.
Address which sent an ICMP packet-too-big message.
M
ODE
total received
header errors
too big errors
no routes
address errors
unknown protocols
truncated packets
discards
delivers
reassembly request datagrams
reassembly succeeded
reassembly failed
forwards datagrams
requests
discards
no routes
generated fragments
fragment succeeded
fragment failed
input
errors
destination unreachable messages
packet too big messages
time exceeded messages
parameter problem message
echo request messages
echo reply messages
router solicit messages
router advertisement messages
neighbor solicit messages
– 1389 –
| IP Interface Commands
C 49
HAPTER
*
IPv6 Interface