Html Configuration And Control; Accessing The Web Pages - Extron electronics WindoWall Pro Series User Manual

HTML Configuration
and Control
This section provides procedures for accessing and using the WindoWall Pro embedded
web pages. Topics include:
•
•
•
•
•
The WindoWall Pro and the WindoWall Pro DI can be controlled and configured using
HTML web pages that are accessed over a network or from a local PC connected to the
WindoWall Pro LAN port. The WindoWall Pro has factory-installed HTML web pages that
allow you to view and adjust IP settings, upload firmware and other files to the unit, and
select a background image for the display. You can access these HTML pages using a web
browser such as Microsoft Internet Explorer.
NOTE: Administrators have access to all of the web pages and are able to make

Accessing the Web Pages

To access the WindoWall Pro HTML web pages:
1.
2.
3.
Accessing the Web Pages
Viewing System Status
Using the Configuration Pages
Using the File Management Page
Using the Background Page
changes to settings. Users can access the pages on the
tabs only.
Background
Start the web browser program.
Enter the IP address of your unit in the browser
NOTE: If your local system administrators have not changed the address, use the
factory-specified default, 192.168.254.254, for this field.
If you want the browser to display a page other than the default page (such as a custom
page that you have created and uploaded), enter a slash (
open.
NOTES:
• The browser
Address
nnn.nnn.nnn.nnn/optional_file_name.html
• The following characters are invalid in file names:
{space}
~ @ = ` [ ] { } < > ' " ; : | \
WindoWall Pro Series • HTML Configuration and Control
Address
field should display the address in the following format:
and
and
System Status
field.
) and the name of the file to
/
.
?
51