Extron electronics WindoWall Pro Series User Manual page 47

ASCII (Telnet)
Command
(Host to Processor)
Bi-directional Serial Data Port (continued)
Configure flow
E X10!
control 24
View flow control E X10!
Configure receive
E X10!
timeout 24
NOTES:
• X10! = Port number (
X10@
•
= Command data section. For web encoding for
numbers.
• X10(
= Time in tens of milliseconds that the WindoWall Pro will wait until receipt of the first response character before
terminating the command. Default = 10 = 10 ms. Max. = 32767.
• X11)
= Time in tens of milliseconds that the WindoWall Pro will wait between characters being received via a serial
port before terminating the current command or receive operation. Default = 20 = 20 ms. Max. = 32767.
• X11!
= Message length #L or #D. The letter parameter is case sensitive (requires capital D or capital L).
L =Length of the message to be received.
D = Delimiter value. A delimiter of ASCII 0A = 10D.
# = Byte count (for L) or a single ASCII character expressed in decimal form (for D).
The byte count # can be 0-32767. Default = 0.
The ASCII decimal # can be 0-00255. Default = the byte count.
A 3-byte length = 3L. The response includes leading zeros.
• X11%
= Priority status for port
0 = Use Send data string command parameters (default).
1 = Use Configure receive timeout command parameters.
The response includes leading zeros.
X10( X11) X11!
•
The * * *
View receive E X10!
timeout
URL Encoded (Web)
(Host to Processor)
X12! X12@ }
* , CF
X10! X12!
W %02A
} X10! |
CF W CF
X10( X11) X11% X11!
* * * *
X10! X10(
W %2A
- )
01 99
X10!
receiving timeouts. For
X10(
sequence is optional. If
} X10! |
CE W CE
WindoWall Pro Series • Remote Configuration and Control
Response
(Processor to Host)
X12@ |
%02C CF
X10! X12!
Cpn • Cfl
X12! X12@ |
,
}
CE
X11) X11% X11!
%2A %2A %2A
X10! X10(
Cpn • Cce
X10@
, be sure to convert non-alphanumeric characters to hex
X11%
:
X11)
and are not specified, the defaults are used.
X10( X11) X11%
, ,
Additional Description
X12@ ]
,
X12!
Set flow control type
X12@
with ms between bytes.
X12!
For :
H = Hardware.
S = Software.
N = None (default).
X12@
= 0000 through 0001.
Default = 0 ms.
|
CE
X11) X11% X11! ]
, , ,
Set the time that the
WindoWall Pro will wait for a
response before terminating
the command.
X11! ]
,
41