Table of Contents
Advertisement
7.
On the Open dialog box, navigate to the new firmware file, which has an S19 extension,
and double-click it.
Figure 58.
Open Dialog Box for Firmware File Selection
ATTENTION:
Valid firmware files must have the file extension S19. A file with any
other extension is not a firmware upgrade for this product and could cause the
WindoWall Pro to stop functioning.
NOTES:
•
The original factory-installed firmware is permanently available on the
WindoWall Pro. If the attempted firmware upload fails for any reason, the
WindoWall Pro reverts to the factory version.
•
When downloaded from the Extron website, by default the firmware is placed in
a folder at:
C:\Program Files\Extron\Firmware\MGP Pro
C:\Program Files (x86)\Extron\Firmware\MGP Pro
On the Add Device dialog box, the path to the new firmware file is displayed in the
field.
(Windows XP) or
WindoWall Pro Series • Reference Information
(Windows 7).
Path
81
Advertisement
Table of Contents
Need help?
Do you have a question about the WindoWall Pro Series and is the answer not in the manual?
Questions and answers