Table of Contents
Advertisement
5.
Open the firmware file. Its name appears in the field below the Current Firmware Version
on the Firmware Upgrade screen.
6.
Click the
button on the Firmware Update screen to start the firmware update
Upload
process. While the firmware is being uploaded, the
.
Uploading...
NOTE: While the firmware is uploading and rebooting, do not press any front panel
buttons or make any selections on the web pages.
When the uploading process is complete, the
changes back to
Upload
When the update is complete, the new firmware version number is displayed in the
Current Firmware Version
that appears on power-up, containing the new firmware version number.
7.
If you want to further verify that the new version has been loaded, click the
and view the current firmware version on the System Status screen.
Uploading using the Firmware Loader
An alternative way to update the WindoWall Pro firmware is to download and run the
Firmware Loader software.
1.
Download the Firmware Loader installer executable file to your computer.
a.
On the Extron web page, click the
b.
On the Download Center page, click
c.
Locate the "Firmware Loader" line and click the
d.
Follow the instructions on the download screens to save the installer file to your
computer.
2.
If necessary, download the latest version of WindoWall Pro firmware and install it on
your computer (see
Downloading the Firmware
Upload
Uploading...
.
field. The LCD screen on the unit displays the first screen
tab.
Download
Software
on the page 77).
WindoWall Pro Series • Reference Information
button changes to
button on the screen
Status
on the left sidebar menu.
link at the far right.
Download
tab
79
Advertisement
Table of Contents
Need help?
Do you have a question about the WindoWall Pro Series and is the answer not in the manual?
Questions and answers