Extron electronics WindoWall Pro Series User Manual page 88

8. If this is the only device to which you are uploading firmware, click
WindoWall Pro information is added to the Devices panel of the Firmware Loader dialog
box and the Add Device dialog box closes.
If you will be uploading the firmware to multiple WindoWall Pro WindoWall Pros
that are connected to your computer, do the following:
a. Click . Your first device is added to the Devices panel of Firmware Loader
Add Next
dialog box, and the Add Device dialog box remains open.
b. For each additional device you want to add to the Firmware Loader dialog box,
repeat steps 4 through 7, then click
c. For the last device, click
the Add Device dialog box.
Figure 59. Firmware Loader Dialog Box with a WindoWall Pro Added
9. If you want to remove a device from the Devices panel, do the following:
a. Click on the names of the devices to be deleted, to highlight them.
b. Select
Remove Selected Device(s)
c. On the Remove Device(s) dialog box, select or deselect any devices on the list as
desired, then click
To remove all devices, select
.
Add Next
(instead of
Add Add Next
from the
.
Remove
Remove All Devices
WindoWall Pro Series • Reference Information
. The
Add
) to add the device and to close
menu.
Edit
from the menu.
Edit
82