Extron electronics WindoWall Pro Series User Manual page 62

Date/Time Settings fields
The Date/Time Settings panel provides a location for viewing and setting the time functions.
Figure 35. Date/Time Settings Panel
To change the date and time settings:
1. Click the drop box for the desired variable. The adjustable variables are month, day,
year, hours, minutes, am or pm, and (time) zone. A drop-down scroll box appears (the
drop box is selected in figure 35).
Month
2. Click and drag the slider or click the
until the desired variable is visible.
3. Click on the desired variable.
NOTES: If setting the time, set the local time. The
enter the offset from Greenwich Mean Time (GMT).
The field identifies the standard time zone that has been selected and
Zone
displays the amount of time, in hours and minutes, that the local time varies from
the GMT international time reference.
4. Repeat steps 1 through 3 for other variables that need to be changed.
5. Select the appropriate
select .
Off
NOTE: When daylight saving time is enabled, the WindoWall Pro updates its
internal clock between Standard Time and Daylight Saving Time in the spring
and fall on the date that the time change occurs in the United States of America
and parts of Europe and Brazil. When daylight saving time is turned off, the
processor does not adjust its time reference.
6. Click the button at the bottom of the Date/Time Settings panel to implement
Submit
your selections.
Scroll Up
radio button. To turn off daylight saving time,
Daylight Saving
WindoWall Pro Series • HTML Configuration and Control
button or button
Scroll Down
variable allows you to then
Zone
56