Extron electronics WindoWall Pro Series User Manual page 50

ASCII (Telnet)
Command
(Host to Processor)
Information Requests (continued)
Request model
1I
name
Request model
2I
description
Request system 3I
memory usage
Request user
4I
memory usage
IP Setup Commands
E X10%
Set unit name 24
Set unit name to E
• CN
factory default 24
E
Example:
• CN
Read unit name E }
CN
URL Encoded (Web)
(Host to Processor)
1I
2I
3I
4I
} X10% |
CN W CN
} |
W %20 CN
} |
W %20 CN
|
W CN
WindoWall Pro Series • Remote Configuration and Control
Response
Additional Description
(Processor to Host)
X4$ ]
Show unit model name
X4$
can be:
With tagged
MGP 464 Pro
response – verbose
modes 2 and 3: MGP 464 Pro DI
X4$ ]
Inf01 *
Standard: Multi-Graphic Processor
DI: Multi-Graphic Processor w/ HDMI
]
option
With tagged response – verbose modes 2 and 3:
Inf02 * Multi-Graphic Processor [w/ HDMI
]
option]
Show type of unit.
n bytes used out of n kBytes
With tagged response – verbose modes 2 and 3:
Inf03 * n bytes used out of n kBytes
Show amount of memory
used and total available
memory for system
operations.
n bytes used out of n kBytes
With tagged response – verbose modes 2 and 3:
Inf04 * n bytes used out of n kBytes
Show amount of user
memory used and total
available user memory.
X10% ] Change the processor name
Ipn •
X10%
to
choosing.
X10%
For
can consist of up to 24
alphanumeric characters and
the minus sign or hyphen
(-). The first character must
be a letter, the last character
cannot be a minus sign.
Case does not matter.
X13% ] X13%
Ipn • is the name the
processor was shipped with:
MGP464Pro[DI]-xx-xx-
xx, a combination of the
model and the last three pairs
of the hex numbers in the unit
MAC address.
MGP464-PRO-DI-09-44-92
The factory name of
this unit indicates that it
is an MGP 464 Pro, DI
configuration, and the last 6
digits of its MAC address are
09-44-92.
X10% ]
View current unit name
X4$
.
]
]
]
]
, a name of your
: The name
]
X10%
.
44