Table of Contents
Advertisement
b.
Click
Figure 12.
2.
Set up a new WindoWall Pro project (see
open an existing one (see the WindoWall Console help file).
Setting Up a WindoWall Pro Project
To set up the WindoWall Console software to configure and operate your WindoWall Pro
system, you must create a new project. This section describes the procedure for creating a
new project using the New Project Wizard.
NOTE: You can also create (or edit) a project by entering the information on the
Display Configuration
WindoWall Console help file for more information on using these screens).
1.
From the
Figure 13.
. The WindoWall Console main window opens.
Login
WindoWall Console Main Window
,
Source Settings
menu, select
Wizards
New Project
Selecting New Project from the Wizards Menu
WindoWall Pro Series • Remote Configuration and Control
Setting Up a WindoWall Pro
, and
tabs (see the
I/O Schematic
.
Project), or
15
Advertisement
Table of Contents
Need help?
Do you have a question about the WindoWall Pro Series and is the answer not in the manual?
Questions and answers