Table of Contents
Advertisement
8.
When ready to install the new firmware on your computer, locate the downloaded file,
and double-click on it to open it.
9.
Follow the instructions on the Installation Wizard screens to install the new firmware on
your computer. A Release Notes file, giving information on what has changed in the new
firmware version, and a set of instructions for updating the firmware are also loaded.
Updating the firmware on the WindoWall Pro
After you have installed the new firmware on your computer, you must upload it to the
WindoWall Pro. To upload the firmware using the web pages:
1.
On the WindoWall Pro
Configuration
menu to display the Firmware Upgrade page.
2.
Click
to open the Choose File to Upload (or Choose File) dialog box, and locate
Browse
the firmware file on your computer or server. The file extension must be
Figure 38.
Choose File to Upload Dialog Box
ATTENTION:
Uploading a file with an extension other than .S19 may cause the
unit to stop functioning.
3.
Open the firmware file. Its name appears below the Current Firmware Version on the
Firmware Upgrade page.
4.
Click the
button on the Firmware Update page to start the firmware update
Upload
process. While the firmware is being uploaded, the
.
Uploading...
While the firmware is uploading and rebooting, do not make any
NOTE:
selections on the web pages.
When the uploading process is complete, the
back to
.
Upload
NOTE:
As an alternative method of updating the WindoWall Pro firmware, you can
use the Firmware Loader software (see
information on downloading and using this software).
tab, select
Firmware Upgrade
Upload
Uploading...
Updating the Firmware
WindoWall Pro Series • HTML Configuration and Control
from the sidebar
.
.S19
button changes to
button on the screen changes
on page 75 for
59
Advertisement
Table of Contents
Need help?
Do you have a question about the WindoWall Pro Series and is the answer not in the manual?
Questions and answers