4447-20x
Right cover removal
Warning: Do not interchange screws during reinstallation, as it may damage the machine. Always take note of
their original placement.
1.
Remove the power supply. See
2.
Remove the duplex unit. See
3.
Remove the rear cover. See
4.
Press the scanner latch handle (A) to release the ADF/scanner assembly.
5.
Open the ADF/scanner assembly.
6.
Remove the plastic screw (B) securing the right cover to the printer.
4-29
Service Manual
"Power supply removal" on page
"Duplex unit removal" on page
"Rear cover removal" on page
A
4-10.
4-11.
4-25.
B
Previous
Next
Go Back
Disassembly
Flow chart