Pick Roller Assembly Removal - Lexmark MX81 series Service Manual

2
Lift the media tray, as shown in the following image, and remove it from the machine.

Pick roller assembly removal

1
Remove the media tray. See
2
Lower the front duplex flap to gain access to the pick roller assembly.
Note: When removing the pick roller assembly, avoid all contact with the roller surfaces, or paper jams might
occur.
3
Squeeze both sides of the pick roller latch, and move the pick roller assembly to the right to remove it.
Note: When replacing the pick rollers, do not touch the roller surfaces, or paper jams might occur.
"Media tray removal" on page
Repair information
363
362.
7463