Initial Setup Example; Overview; Creating A Vlan - ZyXEL Communications GS2200-24 User Manual

C
H A P T E R

5.1 Overview

This chapter shows how to set up the Switch for an example network.
The following lists the configuration steps for the initial setup:
• Create a VLAN
• Set port VLAN ID
• Configure the Switch IP management address

5.1.1 Creating a VLAN

VLANs confine broadcast frames to the VLAN group in which the port(s) belongs.
You can do this with port-based VLAN or tagged static VLAN with fixed port
members.
In this example, you want to configure port 1 as a member of VLAN 2.
Figure 17 Initial Setup Network Example: VLAN
GS2200-24 User's Guide

Initial Setup Example

5
51