System Information - ZyXEL Communications GS2200-24 User Manual

Chapter 8 Basic Setting

8.3 System Information

In the navigation panel, click Basic Setting > System Info to display the screen
as shown. You can check the firmware version number.
Figure 35 Basic Setting > System Info
The following table describes the labels in this screen.
Table 8 Basic Setting > System Info
LABEL
System
Name
Product
Model
ZyNOS F/W
Version
Ethernet
Address
Hardware Monitor
Temperature
Unit
Temperature
Current
MAX
MIN
Threshold
Status
72
DESCRIPTION
This field displays the descriptive name of the Switch for identification
purposes.
This field displays the product model of the Switch. Use this information
when searching for firmware upgrade or looking for other support
information in the website.
This field displays the version number of the Switch 's current firmware
including the date created.
This field refers to the Ethernet MAC (Media Access Control) address of the
Switch.
The Switch has temperature sensors that are capable of detecting and
reporting if the temperature rises above the threshold. You may choose
the temperature unit (Centigrade or Fahrenheit) in this field.
BOARD, MAC and PHY refer to the location of the temperature sensors on
the Switch printed circuit board.
This shows the current temperature at this sensor.
This field displays the maximum temperature measured at this sensor.
This field displays the minimum temperature measured at this sensor.
This field displays the upper temperature limit at this sensor.
This field displays Normal for temperatures below the threshold and Error
for those above.
GS2200-24 User's Guide