Vlan Status - ZyXEL Communications GS2200-24 User Manual

9.4 VLAN Status

Click Advanced Application > VLAN from the navigation panel to display the
VLAN Status screen as shown next.
Figure 42 Advanced Application > VLAN: VLAN Status
The following table describes the labels in this screen.
Table 14 Advanced Application > VLAN: VLAN Status
LABEL
VLAN Search
by VID
The Number
of VLAN
The Number
of Search
Results
Index
VID
Elapsed Time
Status
Change Pages
GS2200-24 User's Guide
DESCRIPTION
Enter an existing VLAN ID number(s) (separated by a comma) and click
Search to display only the specified VLAN(s) in the list below.
Leave this field blank and click Search to display all VLANs configured on
the Switch.
This is the number of VLANs configured on the Switch.
This is the number of VLANs that match the searching criteria and display
in the list below.
This field displays only when you use the Search button to look for
certain VLANs.
This is the VLAN index number. Click on an index number to view more
VLAN details.
This is the VLAN identification number that was configured in the Static
VLAN screen.
This field shows how long it has been since a normal VLAN was registered
or a static VLAN was set up.
This field shows how this VLAN was added to the Switch.
dynamic: using GVRP
static: added as a permanent entry
Click Previous or Next to show the previous/next screen if all status
information cannot be seen in one screen.
Chapter 9 VLAN
91