Global Dhcp Relay Configuration Example; Configuring Dhcp Vlan Settings - ZyXEL Communications GS2200-24 User Manual

31.5.1 Global DHCP Relay Configuration Example

The following figure shows a network example where the Switch is used to relay
DHCP requests for the VLAN1 and VLAN2 domains. There is only one DHCP
server that services the DHCP clients in both domains.
Figure 132 Global DHCP Relay Network Example
DHCP Server:
192.168.1.100
Configure the DHCP Relay screen as shown. Make sure you select the Option 82
check box to set the Switch to send additional information (such as the VLAN ID)
together with the DHCP requests to the DHCP server. This allows the DHCP server
to assign the appropriate IP address according to the VLAN ID.
Figure 133 DHCP Relay Configuration Example

31.6 Configuring DHCP VLAN Settings

Use this screen to configure your DHCP settings based on the VLAN domain of the
DHCP clients. Click IP Application > DHCP in the navigation panel, then click the
VLAN link In the DHCP Status screen that displays.
GS2200-24 User's Guide
VLAN1
Chapter 31 DHCP
VLAN2
265