The following describes the DHCP relay information that the Switch sends to the
DHCP server:
Table 83 Relay Agent Information
FIELD LABELS
Slot ID
Port ID
VLAN ID
Information
31.4 DHCP Status
Click IP Application > DHCP in the navigation panel. The DHCP Status screen
displays.
Figure 130 IP Application > DHCP Status
The following table describes the labels in this screen.
Table 84 IP Application > DHCP
LABEL
Relay Mode
GS2200-24 User's Guide
DESCRIPTION
(1 byte) This value is always 0 for stand-alone switches.
(1 byte) This is the port that the DHCP client is connected to.
(2 bytes) This is the VLAN that the port belongs to.
(up to 64 bytes) This optional, read-only field is set according to
system name set in Basic Settings > General Setup.
DESCRIPTION
This field displays:
•
None: if the Switch is not configured as a DHCP relay agent.
•
Global: if the Switch is configured as a DHCP relay agent only.
•
VLAN: followed by a VLAN ID if it is configured as a relay agent for
specific VLAN(s).
Chapter 31 DHCP
263