C
H A P T E R
22.1 Overview
This chapter introduces the queuing methods supported.
Queuing is used to help solve performance degradation when there is network
congestion. Use the Queuing Method screen to configure queuing algorithms for
outgoing traffic. See also Priority Queue Assignment in Switch Setup and
802.1p Priority in Port Setup for related information.
22.2 What You Can Do
Use the Queueing Method screen
the queues of the Switch.
22.3 What You Need to Know
Queuing algorithms allow switches to maintain separate queues for packets from
each individual source or flow and prevent a source from monopolizing the
bandwidth.
22.3.1 Strictly Priority Queuing
Strictly Priority Queuing (SPQ) services queues based on priority only. As traffic
comes into the Switch, traffic on the highest priority queue, Q7 is transmitted
first. When that queue empties, traffic on the next highest-priority queue, Q6 is
transmitted until Q6 empties, and then traffic is transmitted on Q5 and so on. If
higher priority queues never empty, then traffic on lower priority queues never
gets sent. SP does not automatically adapt to changing network requirements.
GS2200-24 User's Guide
Queuing Method
(Section 22.4 on page
This distributes bandwidth across the different traffic queues.
22
183) set priorities for
181