Activating Diffserv - ZyXEL Communications GS2200-24 User Manual

traffic flow are more likely to be dropped when congestion occurs than the packets
in the Platinum traffic flow as they move across the DiffServ network.
Figure 127 DiffServ Network
P - Platinum
G - Gold
S - Silver
B - Bronze

30.4 Activating DiffServ

Activate DiffServ to apply marking rules or IEEE 802.1p priority mapping on the
Switch.
Click IP Application > DiffServ in the navigation panel to display the screen as
shown.
Figure 128 IP Application > DiffServ
The following table describes the labels in this screen.
Table 80 IP Application > DiffServ
LABEL
Active
Apply
Cancel
GS2200-24 User's Guide
A
S G P P
P G S B
S
B
B
DESCRIPTION
Select this option to enable DiffServ on the Switch.
Click Apply to save your changes to the Switch's run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Chapter 30 Differentiated Services
S G P P
259