Setting Port Vid - ZyXEL Communications GS2200-24 User Manual

5.1.2 Setting Port VID

Use PVID to add a tag to incoming untagged frames received on that port so that
the frames are forwarded to the VLAN group that the tag defines.
In the example network, configure 2 as the port VID on port 1 so that any
untagged frames received on that port get sent to VLAN 2.
Figure 18 Initial Setup Network Example: Port VID
Click Advanced
1
Applications > VLAN in
the navigation panel. Then
click the VLAN Port
Setting link.
Enter 2 in the PVID field
2
for port 1 and click Apply
to save your changes back
to the run-time memory.
Settings in the run-time
memory are lost when the
Switch's power is turned
off.
GS2200-24 User's Guide
Chapter 5 Initial Setup Example
53