ZyXEL Communications GS2200-24 User Manual page 281

Intelligent layer 2gbe switch
Hide thumbs Also See for GS2200-24:
Table of Contents

Advertisement

The following table describes the labels in this screen.
Table 90 Management > Access Control > SNMP
LABEL
General Setting
Version
Get Community
Set Community
Trap
Community
Trap
Destination
Version
IP
Port
Username
User
Information
Index
Username
GS2200-24 User's Guide
DESCRIPTION
Use this section to specify the SNMP version and community (password)
values.
Select the SNMP version for the Switch. The SNMP version on the Switch
must match the version on the SNMP manager. Choose SNMP version
2c (v2c), SNMP version 3 (v3) or both (v3v2c).
Note: SNMP version 2c is backwards compatible with SNMP
version 1.
Enter the Get Community string, which is the password for the
incoming Get- and GetNext- requests from the management station.
The Get Community string is only used by SNMP managers using
SNMP version 2c or lower.
Enter the Set Community, which is the password for incoming Set-
requests from the management station.
The Set Community string is only used by SNMP managers using
SNMP version 2c or lower.
Enter the Trap Community string, which is the password sent with
each trap to the SNMP manager.
The Trap Community string is only used by SNMP managers using
SNMP version 2c or lower.
Use this section to configure where to send SNMP traps from the Switch.
Specify the version of the SNMP trap messages.
Enter the IP addresses of up to four managers to send your SNMP traps
to.
Enter the port number upon which the manager listens for SNMP traps.
Enter the username to be sent to the SNMP manager along with the
SNMP v3 trap.
Note: This username must match an existing account on the Switch
(configured in Management > Access Control > Logins
screen).
Use this section to configure users for authentication with managers
using SNMP v3.
Note: Use the username and password of the login accounts you
specify in this section to create accounts on the SNMP v3
manager.
This is a read-only number identifying a login account on the Switch.
This field displays the username of a login account on the Switch.
Chapter 33 Access Control
281

Advertisement

Table of Contents
loading

Table of Contents