Access Control; Overview; What You Can Do - ZyXEL Communications GS2200-24 User Manual

C
H A P T E R

33.1 Overview

This chapter describes how to control access to the Switch.
A console port and FTP are allowed one session each, Telnet and SSH share nine
sessions, up to five Web sessions (five different user names and passwords) and/
or limitless SNMP access control sessions are allowed.
Table 89 Access Control Overview
Console Port
One session
A console port access control session and Telnet access control session cannot
coexist when multi-login is disabled. See the CLI Reference Guide for more
information on disabling multi-login.

33.2 What You Can Do

• Use the Access Control screen
screen.
• Use the SNMP screen
settings.
• Use the Trap Group screen
SNMP traps that should be sent to each SNMP manager.
• Use the Logins screens
access the Switch via web configurator at any one time.
• Use the Service Access Control screen
what services you may use to access the Switch.
• Use the Remote Management screen
group of one or more "trusted computers" from which an administrator may use
a service to manage the Switch.
GS2200-24 User's Guide

Access Control

SSH Telnet FTP
Share up to nine One session
sessions
(Section 33.3 on page
(Section 33.4 on page
(Section 33.5 on page
(Section 33.6 on page
Web
Up to five
accounts
280) to display the main
280) to configure your SNMP
283) to specify the types of
284) to assign which users can
(Section 33.7 on page
(Section 33.8 on page 286) to specify a
33
SNMP
No limit
285) to decide
279