Basic Setting; Chapter 8 Basic Setting; Overview; What You Can Do - ZyXEL Communications GS2200-24 User Manual

C
H A P T E R

8.1 Overview

This chapter describes how to configure the System Info, General Setup,
Switch Setup, IP Setup and Port Setup screens.
The System Info screen displays general Switch information (such as firmware
version number). The General Setup screen allows you to configure general
Switch identification information. The General Setup screen also allows you to
set the system time manually or get the current time and date from an external
server when you turn on your Switch. The real time is then displayed in the Switch
logs. The Switch Setup screen allows you to set up and configure global Switch
features. The IP Setup screen allows you to configure a Switch IP address in each
routing domain, subnet mask(s) and DNS (domain name server) for management
purposes.

8.2 What You Can Do

• Use the System Info screen
version number.
• Use the General Setup screen
settings such as the system name and time.
• Use the Switch Setup screen
type, set the GARP timers and assign priorities to queues.
• Use the IP Setup screen
address, default gateway device, the default domain name server and the
management VLAN ID.
• Use the Port Setup screen
settings.
GS2200-24 User's Guide

Basic Setting

(Section 8.3 on page
(Section 8.4 on page
(Section 8.6 on page
(Section 8.7.1 on page
(Section 8.8 on page
8
72) to check the firmware
74) to configure general
77) to choose your VLAN
79) to configure the Switch IP
81) to configure Switch port
71