ZyXEL Communications GS2200-24 User Manual page 204

Chapter 25 AAA
Click on the RADIUS Server Setup link in the AAA screen to view the screen as
shown.
Figure 99 Advanced Application > AAA > RADIUS Server Setup
The following table describes the labels in this screen.
Table 60 Advanced Application > AAA > RADIUS Server Setup
LABEL
Authentication
Server
Mode
Timeout
Index
204
DESCRIPTION
Use this section to configure your RADIUS authentication settings.
This field is only valid if you configure multiple RADIUS servers.
Select index-priority and the Switch tries to authenticate with the first
configured RADIUS server, if the RADIUS server does not respond then
the Switch tries to authenticate with the second RADIUS server.
Select round-robin to alternate between the RADIUS servers that it
sends authentication requests to.
Specify the amount of time in seconds that the Switch waits for an
authentication request response from the RADIUS server.
If you are using index-priority for your authentication and you are
using two RADIUS servers then the timeout value is divided between the
two RADIUS servers. For example, if you set the timeout value to 30
seconds, then the Switch waits for a response from the first RADIUS
server for 15 seconds and then tries the second RADIUS server.
This is a read-only number representing a RADIUS server entry.
GS2200-24 User's Guide