Technical Reference; Vendor Specific Attribute - ZyXEL Communications GS2200-24 User Manual

Chapter 25 AAA
Table 62 Advanced Application > AAA > AAA Setup (continued)
LABEL
Active
Method
Apply
Cancel

25.8 Technical Reference

This section provides technical background information on the topics discussed in
this chapter.

25.8.1 Vendor Specific Attribute

RFC 2865 standard specifies a method for sending vendor-specific information
between a RADIUS server and a network access device (for example, the Switch).
A company can create Vendor Specific Attributes (VSAs) to expand the
functionality of a RADIUS server.
The Switch supports VSAs that allow you to perform the following actions based
on user authentication:
• Limit bandwidth on incoming or outgoing traffic for the port the user connects
to.
• Assign account privilege levels (See the CLI Reference Guide for more
information on account privilege levels) for the authenticated user.
The VSAs are composed of the following:
• Vendor-ID: An identification number assigned to the company by the IANA
(Internet Assigned Numbers Authority). ZyXEL's vendor ID is 890.
• Vendor-Type: A vendor specified attribute, identifying the setting you want to
modify.
• Vendor-data: A value you want to assign to the setting.
Note: Refer to the documentation that comes with your RADIUS server on how to
configure VSAs for users authenticating via the RADIUS server.
210
DESCRIPTION
Select this to activate authorization for a specified event types.
Select whether you want to use RADIUS or TACACS+ for authorization of
specific types of events.
RADIUS is the only method for IEEE 802.1x authorization.
Click Apply to save your changes to the Switch's run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
GS2200-24 User's Guide