ZyXEL Communications GS2200-24 User Manual page 291

Table 97 SNMP InterfaceTraps
OPTION OBJECT LABEL
linkup linkUp
LinkDownEventClear
linkdown linkDown
LinkDownEventOn
autonegotiati AutonegotiationFailedEv
on entOn
AutonegotiationFailedEv
entClear
lldp LLDPRemoteTopologyCh
ange
transceiver- transceiverddmiEventOn 1.3.6.1.4.1.890.1.5.8.55.27
ddmi
transceiverddmiEventCle
ar
GS2200-24 User's Guide
OBJECT ID
1.3.6.1.6.3.1.1.5.4
:
1.3.6.1.4.1.890.1.5.8.55.25
.2.2
1.3.6.1.6.3.1.1.5.3
:
1.3.6.1.4.1.890.1.5.8.55.25
.2.1
:
1.3.6.1.4.1.890.1.5.8.55.25
.2.1
:
1.3.6.1.4.1.890.1.5.8.55.25
.2.2
1.0.8802.1.1.2.0.0.1
.2.1
1.3.6.1.4.1.890.1.5.8.55.27
.2.2
Chapter 33 Access Control
DESCRIPTION
This trap is sent when the
Ethernet link is up.
This trap is sent when the
Ethernet link is up.
This trap is sent when the
Ethernet link is down.
This trap is sent when the
Ethernet link is down.
This trap is sent when an
Ethernet interface fails to
auto-negotiate with the peer
Ethernet interface.
This trap is sent when an
Ethernet interface auto-
negotiates with the peer
Ethernet interface.
This trap is sent when the
LLDP (Link Layer Discovery
Protocol) remote topology
changes.
This trap is sent when one of
the device operating
parameters (such as
transceiver temperature,
laser bias current,
transmitted optical power,
received optical power and
transceiver supply voltage) is
above or below a factory set
normal range.
This trap is sent when all
device operating parameters
return to the normal
operating range.
291