Link Aggregation Status - ZyXEL Communications GS2200-24 User Manual

17.4 Link Aggregation Status

Click Advanced Application > Link Aggregation in the navigation panel. The
Link Aggregation Status screen displays by default. See
151 for more information.
Figure 75 Advanced Application > Link Aggregation Status
The following table describes the labels in this screen.
Table 38 Advanced Application > Link Aggregation Status
LABEL
Group ID
Enabled
Ports
Synchronized
Ports
Aggregator
ID
GS2200-24 User's Guide
DESCRIPTION
This field displays the group ID to identify a trunk group, that is, one
logical link containing multiple ports.
These are the ports you have configured in the Link Aggregation screen
to be in the trunk group.
The port number(s) displays only when this trunk group is activated and
there is a port belonging to this group.
These are the ports that are currently transmitting data as one logical link
in this trunk group.
Link Aggregator ID consists of the following: system priority, MAC
address, key, port priority and port number. Refer to
page 152 for more information on this field.
The ID displays only when there is a port belonging to this trunk group
and LACP is also enabled for this group.
Chapter 17 Link Aggregation
Section 17.1 on page
Section 17.3.2 on
153