ZyXEL Communications GS2200-24 User Manual page 52

Chapter 5 Initial Setup Example
Click Advanced Application > VLAN in the navigation panel and click the Static
1
VLAN link.
In the Static VLAN screen,
2
select ACTIVE, enter a
descriptive name in the Name
field and enter 2 in the VLAN
Group ID field for the VLAN2
network.
Note: The VLAN Group ID field in this screen and the VID field in the IP Setup
screen refer to the same VLAN ID.
Since the VLAN2 network is connected to port 1 on the Switch, select Fixed to
3
configure port 1 to be a permanent member of the VLAN only.
To ensure that VLAN-unaware devices (such as computers and hubs) can receive
4
frames properly, clear the TX Tagging check box to set the Switch to remove
VLAN tags before sending.
Click Add to save the settings to the run-time memory. Settings in the run-time
5
memory are lost when the Switch's power is turned off.
52
GS2200-24 User's Guide