Initial Setup Example; Overview; Create A Vlan - ZyXEL Communications 43222612 User Manual

5.1 Overview

This chapter shows how to set up the Switch for an example network.
The following lists the configuration steps for the initial setup:
•

Create a VLAN

• Set Port VID
• Configure Switch Management IP Address
5.1.1 Create a VLAN
VLANs confine broadcast frames to the VLAN group in which the ports belongs. You can do this with
port-based VLAN or tagged static VLAN with fixed port members.
In this example, you want to configure port 1 as a member of VLAN 2.
Figure 57 Initial Setup Network Example: VLAN
Click Advanced Application > VLAN > VLAN Configuration in the navigation panel and click the Static
1
VLAN Setup link.
Chapter 5 Initial Setup Example

Initial Setup Example

GS2220 Series User's Guide
79
C
H A P T E R
5