ZyXEL Communications GS2200-24 User Manual page 46

Chapter 4 The Web Configurator
The following table describes the links in the navigation panel.
Table 4 Navigation Panel Links
LINK
Basic Settings
System Info
General Setup
Switch Setup
IP Setup
Port Setup
Advanced Application
VLAN
Static MAC
Forwarding
Static
Multicast
Forwarding
Filtering
Spanning Tree
Protocol
Bandwidth
Control
Broadcast
Storm Control
Mirroring
Link
Aggregation
Port
Authentication
Port Security
Classifier
Policy Rule
Queuing
Method
46
DESCRIPTION
This link takes you to a screen that displays general system information.
This link takes you to a screen where you can configure general
identification information about the Switch.
This link takes you to a screen where you can set up global Switch
parameters such as VLAN type, GARP and priority queues.
This link takes you to a screen where you can configure the IP address,
subnet mask (necessary for Switch management) and DNS (domain
name server) and set up to 64 IP routing domains.
This link takes you to a screen where you can configure settings for
individual Switch ports.
This link takes you to screens where you can configure port-based or
802.1Q VLAN (depending on what you configured in the Switch Setup
menu). You can also configure a protocol based VLAN or a subnet based
VLAN in these screens.
This link takes you to a screen where you can configure static MAC
addresses for a port. These static MAC addresses do not age out.
This link takes you to a screen where you can configure static multicast
MAC addresses for port(s). These static multicast MAC addresses do not
age out.
This link takes you to a screen to set up filtering rules.
This link takes you to screens where you can configure the RSTP/MRSTP/
MSTP to prevent network loops.
This link takes you to a screen where you can configure bandwidth limits
on the Switch.
This link takes you to a screen to set up broadcast filters.
This link takes you to screens where you can copy traffic from one port
or ports to another port in order that you can examine the traffic from
the first port without interference.
This link takes you to screens where you can logically aggregate physical
links to form one logical, higher-bandwidth link.
This link takes you to a screen where you can configure IEEE 802.1x port
authentication for clients communicating via the Switch.
This link takes you to screens where you can activate MAC address
learning and set the maximum number of MAC addresses to learn on a
port.
This link takes you to a screen where you can configure the Switch to
group packets based on the specified criteria.
This link takes you to a screen where you can configure the Switch to
perform special treatment on the grouped packets.
This link takes you to a screen where you can configure queuing with
associated queue weights for each port.
GS2200-24 User's Guide