Dhcp; Chapter 31 Dhcp; Dhcp Overview; What You Can Do - ZyXEL Communications GS2200-24 User Manual

C
H A P T E R

31.1 DHCP Overview

This chapter shows you how to configure the DHCP feature.
DHCP (Dynamic Host Configuration Protocol RFC 2131 and RFC 2132) allows
individual computers to obtain TCP/IP configuration at start-up from a server. You
can configure the Switch as a DHCP server or a DHCP relay agent. When
configured as a server, the Switch provides the TCP/IP configuration for the
clients. If you configure the Switch as a relay agent, then the Switch forwards
DHCP requests to DHCP server on your network. If you don't configure the Switch
as a DHCP server or relay agent then you must have a DHCP server in the
broadcast domain of the client computers or else the client computers must be
configured manually.

31.2 What You Can Do

• Use the DHCP Status screen
mode.
• Use the DHCP Relay screen
configure global DHCP relay.
• Use the VLAN Setting screen
DHCP settings based on the VLAN domain of the DHCP clients.

31.3 What You Need to Know

Read on for concepts on DHCP that can help you configure the screens in this
chapter.

31.3.1 DHCP Modes

If there is already a DHCP server on your network, then you can configure the
Switch as a DHCP relay agent. When the Switch receives a request from a
GS2200-24 User's Guide
(Section 31.4 on page
(Section 31.5 on page 264) to enable and
(Section 31.6 on page
31

DHCP

263) to display the relay
265) to configure your
261