Static Route; Chapter 29 Static Route; Overview - ZyXEL Communications GS2200-24 User Manual

C
H A P T E R

29.1 Overview

This chapter shows you how to configure static routes.
The Switch uses IP for communication with management computers, for example
using HTTP, Telnet, SSH, or SNMP. Use IP static routes to have the Switch
respond to remote management stations that are not reachable through the
default gateway. The Switch can also use static routes to send data to a server or
device that is not reachable through the default gateway, for example when
sending SNMP traps or using ping to test IP connectivity.
This figure shows a Telnet session coming in from network N1. The Switch sends
reply traffic to default gateway R1 which routes it back to the manager's
computer. The Switch needs a static route to tell it to use router R2 to send traffic
to an SNMP trap server on network N2.
Figure 124 Static Routing Overview
Telnet
GS2200-24 User's Guide
N1
R1
29

Static Route

N2
SNMP
R2
253