Configuring Protocol Based Vlan - ZyXEL Communications GS2200-24 User Manual

Intelligent layer 2gbe switch

Hide thumbs Also See for GS2200-24:

Table of Contents

Chapter 9 VLAN

traffic from port 6 and 7 will be in another group and have higher priority than

ARP traffic, when they go through the uplink port to a backbone switch C.

Figure 48 Protocol Based VLAN Application Example

9.8.1 Configuring Protocol Based VLAN

Click Protocol Based VLAN in the VLAN Port Setting screen to display the

configuration screen as shown.

Note: Protocol-based VLAN applies to un-tagged packets and is applicable only when

you use IEEE 802.1Q tagged VLAN.

Figure 49 Advanced Application > VLAN > VLAN Port Setting > Protocol Based

GS2200-24 User's Guide