Tacacs+ Server Setup - ZyXEL Communications GS2200-24 User Manual

Chapter 25 AAA

25.6 TACACS+ Server Setup

Use this screen to configure your TACACS+ server settings. See
page 202
Server Setup link in the AAA screen to view the screen as shown.
Figure 100 Advanced Application > AAA > TACACS+ Server Setup
The following table describes the labels in this screen.
Table 61 Advanced Application > AAA > TACACS+ Server Setup
LABEL
Authentication
Server
Mode
206
for more information on TACACS+ servers. Click on the TACACS+
DESCRIPTION
Use this section to configure your TACACS+ authentication settings.
This field is only valid if you configure multiple TACACS+ servers.
Select index-priority and the Switch tries to authenticate with the first
configured TACACS+ server, if the TACACS+ server does not respond
then the Switch tries to authenticate with the second TACACS+ server.
Select round-robin to alternate between the TACACS+ servers that it
sends authentication requests to.
Section 25.3.2 on
GS2200-24 User's Guide