Switch Access And Login - ZyXEL Communications GS2200-24 User Manual

Chapter 40 Troubleshooting
Make sure you understand the normal behavior of the LED. See
1
page 40.
Check the hardware connections. See
2
Inspect your cables for damage. Contact the vendor to replace any damaged
3
cables.
Disconnect and re-connect the power adaptor or cord to the Switch.
4
If the problem continues, contact the vendor.
5

40.2 Switch Access and Login

I forgot the IP address for the Switch.
The default IP address is 192.168.1.1.
1
Use the console port to log in to the Switch.
2
If this does not work, you have to reset the device to its factory defaults. See
3
Section 4.6 on page
I forgot the username and/or password.
The default username is admin and the default password is 1234.
1
If this does not work, you have to reset the device to its factory defaults. See
2
Section 4.6 on page
I cannot see or access the Login screen in the web configurator.
Make sure you are using the correct IP address.
1
• The default IP address is 192.168.1.1.
• If you changed the IP address, use the new IP address.
326
Section 40.1 on page
49.
49.
Section 3.3 on
325.
GS2200-24 User's Guide