Rack-Mounted Installation Requirements; Attaching The Mounting Brackets To The Switch - ZyXEL Communications GS2200-24 User Manual

Chapter 2 Hardware Installation and Connection

2.3.1 Rack-mounted Installation Requirements

• Two mounting brackets.
• Eight M3 flat head screws and a #2 Philips screwdriver.
• Four M5 flat head screws and a #2 Philips screwdriver.
Failure to use the proper screws may damage the unit.
2.3.1.1 Precautions
• Make sure the rack will safely support the combined weight of all the equipment
it contains.
• Make sure the position of the Switch does not make the rack unstable or top-
heavy. Take all necessary precautions to anchor the rack securely before
installing the unit.

2.3.2 Attaching the Mounting Brackets to the Switch

Position a mounting bracket on one side of the Switch, lining up the four screw
1
holes on the bracket with the screw holes on the side of the Switch.
Figure 5 Attaching the Mounting Brackets
Using a #2 Philips screwdriver, install the M3 flat head screws through the
2
mounting bracket holes into the Switch.
Repeat steps
3
the Switch.
You may now mount the Switch on a rack. Proceed to the next section.
4
32
1 and 2 to install the second mounting bracket on the other side of
GS2200-24 User's Guide