Specifying The Scope Of Printing On The Fabric Used (Effective Printing Area); Changing The Dead Space - MIMAKI Textile Jet Tx3-1600 Operation Manual

Specifying The Scope Of Printing On The Fabric Used
(Effective Printing Area)
The plotter has an area which cannot perform printing, due to mechanical reasons. This area is
called "dead space."
The effective printing area is obtained by excluding the dead space from the printing fabric.
Dead space
Default : 10 mm
Fabric Retainer
Feeding
direction
• The dead space at the front and rear edges of the fabric can be reduced
using a guiding fabric.

Changing the dead space

The dead space is resizeable area.
The effective printing area can be changed by changing the dead space.
For the method of setting a dead space, refer to Page 4.10.
ead space
D
Default : 10 mm
Effective
Fabric Retainer
printing
area
Roll Fabric
- 2.39 -