Table of Contents
Advertisement
Effective Plotting Area
The device has an area which cannot perform printing, due to mechanical reasons.
This area is called " dead space".
25 mm
Medium
feeding
direction
Downloaded From ManualsPrinter.com Manuals
• When using a roll rack or take-up unit, the plot-able range becomes smaller.
• When setting a media on the take-up unit, the media in-between the take-up
unit and the carriage cannot be plotted. Be sure the plot range is differ from
the case the take-up unit is not used.
When using a roll rack
and take-up unit.
1100 mm
Effective
printing
area
25 mm
1500 mm
Changing the effective printing area...
Initial value of dead space for right and left of medium is 25 mm each.
The effective plotting area can be changed by changing the dead space.
Dead space is set with [Margin] in FUNCTION mode.
When using a roll holder
0 mm
Effective
printing
area
25 mm
25 mm
- 4.13 -
None of roll rack, take-up
unit, or a roll holder is used.
110 mm
Effective
printing
area
65 mm
Page 4.8
25 mm
Advertisement
Table of Contents
