Effective Plotting Area - MIMAKI JV5-320S Operation Manual

3 Printing

Effective Plotting Area

The printer has an area where printing is not permitted, for mechanical reasons.
This area is called "non-printing area".
25 mm
Media feeding
direction
The initial value of the right and left non-printing area of media is 25 mm each.

The effective printing area can be changed by changing the non-printing area.
Set the non-printing area using [MARGIN] in FUNCTION mode.
*1 When [DIRECT] has been selected as FEED METHOD, a maximum of 127 mm is added.
Margin
This function adjusts the right and left margins of the media.
Use this function when margines other than 25 mm, which is the standard margin, are required.
Each of the right and left margins of the media can be set independently. (-20 to 75 mm)
3-54
0 mm
Effective
25 mm
printing area
150 mm *1
Roll media
200 mm
Effective
25 mm
printing area
150 mm
Cut sheet media
25 mm